Since 1983, Anonite Surfaces have been a pioneer in solid surfacing, known for their unbridled passion and spirited innovations.
Over the years, they have established new product benchmarks, including realistic textures, recycled products, and rich collections inspired by glass, concrete, precious metals, and other natural materials.
COMPOSITION & MATERIALS
Avonite Surfaces is a patented, non-porous homogenous blend of either polyester or acrylic alloys and fillers. This creates a surfacing material that looks like stone but cuts like wood. The grain pattern goes all the way through which allows for three dimensional shaping.
C/T/T/PAvonite surfaces are available in many colours, from natural minerals, to metallics. A complete selection of granite, gemstone, crystelles, glass and architectural solids are available. Many of the materials are recycled. See below-
Uses
Their surfaces have become international favorites in leading hotels, resorts, specialty restaurants, and unique corporate environments. They're equally well known for distinctly personal residential projects. Because the material can be worked with conventional wood- working power tools, the design possibilities are unlimited. Countertops, wall cladding, furniture, mouldings, architectural signage and accessories can be beautifully created with a guarantee of durability.
LIMITATIONS
Many Avonite Surfaces products are suitable for exterior use. Contact Technical Services regarding limitations and approvals for exterior applications. Do not use in areas exposed to sustained temperatures in excess of 375°F (CI) or 260°F (CIII). Seaming with joint adhesive should not be performed when the ambient temperature of the work area is below 55°F (13°C).
SIZES: Avonite Surfaces Studio Collection™ sheets are available in 36” (915mm) width by 120” (3048mm) length. Foundations™ acrylic solid surfacing is available in 30” (762mm) width by 144” (3658mm) length. Custom sizes are available on special order.
THICKNESS
All Avonite Surfaces sheets are available in standard thickness of 1/2” (12mm). Foundations™ are available in 1/2” (12mm) and 1/4” (6mm) thicknesses.
FINISH: The factory finish of Avonite Surfaces is a matte finish approximating 220 grit sandpaper. A satin sheen or a high polish can be obtained by buffing with prescribed polishing compounds.
WEIGHT: Avonite Surfaces sheet stock in 1/2” (12mm) thickness weighs approximately 4.0 lbs. per sq. ft. in the Class I rated materials (CI and F1). Class III sheets weigh approximately 3.1 lbs. in 1/2” (12mm) thickness (G3 and K3).
Contact
Europe
Randy Reynolds
rreynolds@avonitesurfaces.com
International Sales Representative
www.avonitesurfaces.com
No comments:
Post a Comment